That sounds effing awesome! I have to try this!
Could you breakdown whats going on here? I am hearing some reverb so I am guessing this is 5 tracks?
It’s been ages since I created that but yes it was using an FX track also, with FM Machines and DigiPro Box but the technique eludes me for some stupid reason right now.
This was the note i made on SC for the one above -
Working on some new beat and sound design experiments focusing on just the Elektron Monomachine as a sound source. Suffice to say the little SFX60+MkII never ceases to surprise with what it is capable of when you dig deep and explore Fx machines, neighbour tracks and even feedback looping a set of outputs into the inputs for reprocessing.
Ever since seeing Nicholas Lem’s live set I have gone back to this one unit with fresh ears, eyes, mindset and a new found appreciation for just what a clever piece of design it really is.
This was another one I did ( all MnM except the cello sample) that i made some notes for though.
https://soundcloud.com/venndiagram/monomachine-loop-test-part-for
Another reason why I love the Monomachine - ambient drone + string drone courtesy of ESX24 all beats programmed in the Monomachine and recorded in a single take.
Monomachine Track Config and Machines looks like this -
Track 1 GND>SIN
Track 2 DPRO> Box
Track 3 DPRO>BOX
Track 4 FM>STAT
Track 5 DPRO>BOX
Track 6 FX>FLANGER
FX INBUT is BUS CD with Track 2 outputting to BUS ABCD and Track 4 to BUS CD ONLY
I also find when using DPro>Box machines and the retrig function that you get far more mileage out of it with zero attack, and very little release with most of the trickery coming from how you use the HOLD and Decay features of the AMP envelope.
The GND>SIN Machine can also do some incredible good kicks with lots of thunk when needed also.
Funnily enough I was playing about with the DPRO>BOX machine for the first time today and really getting into it. I was all set to sell the Monomachine on, thinking it wasn’t for me, but it suddenly clicked. It’s a more inspiring instrument than the A4 for me.
tisakillerdrummchin
gives bite and sub, though you wont hear the sub lest you got
something to hear it with.
trying to do a bunch of dm kits
cause poly mode has been pushed off the table by recent purchases
like a lot of va/digi layering is where it really gets going
…thought i would share this, it’s not only drums but it’s entirely made using a MnM so perhaps you can find something interesting…
thanks for sharing. i was digging into the DPRo a while back with arpeggiator and stuff like that but didn’t take it much farther. it sounds like there is a lot more potential than i have achieved so far with that machine. i was mostly interested in the synthesis machines for this topic, but hearing some really fresh stuff from that DPRo. i find the FM machines to be my favorites so far to get interesting percussions. keep the suggestions and examples coming! i’ll post some clips once i build a few more kits.
After reading this thread I had a little experiment. Here is the result. http://www.elektronauts.com/t/nedavine-mnm-as-drm/3557
Good stuff guys. Still exploring, but I think between the MnM and OP-1 I will have all the percussion/drums I need to feed the OT. Too bad the Pulse 2 didn’t make the cut against the MnM, but I only have so much room and the MnM is just too powerful 
the +/- exponential lfo set to trig on is useful for getting more snap.
i think the filters are the easiest way to get started with percussion and also a good way to learn the filters. (and then you can use them on effects tracks too!) there is a huge range of sound within only a couple steps on the base and width knobs.
and yeah, super bass.
a lot of times i start with the filter and then go back and try blending in synth sounds.
Here’s a live set I did centered around the MnM and the A4. The first track is live A4 keyboards + live MnM arpeggio drums. It’s fun how you can add individual hits to gradually get a longer and longer drum loop, changing meters from 3 to 4 etc as you go along.
The second track is a programmed drum beat on the MnM, and I use the arpeggio function to add drum fills here and there.
Every time I hear the VO6 Machine I get the chills. I mean you can do that with a vocoder but there is just something about the machine talking that gets me. Great set!
Thanks! Yeah, The VO6 is great. Here I set the LFOs up to generate new phonems for each trig, so it’s pretty confusing. Still I manage to make some meaning out of it here and there, haha.
Wow awesome Mnm VO6 and drum programming!
Use DYN FX as a master or two DYN.
SYN 1+2=DYN. 4+5=DYN.
Tweak atck/rel. The rest of elektrons DYN parameters are a mystery, but it will work for percussion funs. Play around.
Great set pseen! Love the Vo voices.
“Here I set the LFOs up to generate new phonems for each trig, so it’s pretty confusing”
do you mind giving a brief explanation on how this is done? really interested in messing around with this cause I seem to never get anything so audibly interesting from V06 (which is my own fault)
From the top of my head - I set the three LFOs up with S&H, trigger synch, slowest tempo. One LFO modulates the consonant parameter, the other two do the vowels. I think I set the three VO6 parameters in question to 12 o clock, and then modulate them with a value of 32 for each LFO, so you basically get the whole range of sounds.
The VO6 then goes into the vocoder on a Boss SE-70, where it modulates a mono synth from one of the other MnM channels. Can’t remember the settings for this, but a bit of tweaking went into getting a deep, raspy and sinister sound for the carrier part.
awesome man, the LFO’s are still something that I haven’t completely gotten the grasp of so this will be a good project to tinker with. thanks for the insight, and I really enjoyed the video!
gratzi
