Man, Thank you so much for your time and effort to explain all this. Now that you mentioned source page and encoders to scroll down, I think I did not scroll to channel 9. It is still on 1. That could be a problem but I will check this as soon as I get chance.
Still not sure why I can hear notes when play them if this is not setup correctly but I will check all of your suggestions.
1 Like
Keystep should be good
Thank you again. Will post back with results
ok actually source page will just show X until you enable the chan then scroll to 9. probably that, just check that one first.
it’s all good. hope it works out for you man.
cool let us know.
make sure to hold func then press encoder A or scrolling will do nothing.
I think you have it set correctly to send note control from keystep to the moog otherwise it wouldn’t trigger notes, but it’s not enabled on the bank A midi channel so the sequence isn’t reaching the moog from the dt. that’s my guess.
I remember pressing them to enable but did not choose channel… I’m sure this is the problem… will see … Feel so dumb…
naw man, lot to remember. don’t trip.
Thank you so much. Will let you know what happened
1 Like
cool. np 
1 Like
Shigginpit with the serious help desk action. Kudos!
2 Likes
Hi again… just to update…
Unfortunately, none of you suggestions worked and going through all of them, I noticed few things that I want to mention.
On my Digitakt, auto channel is 14 and not sure why, could it be because keystep is also 14.
On SRC page, after I enable MIDI track by pressing encoder, channel 9/A is actually number 1, 10/B is 2. Could be how they are setup on MIDI config but default in 1 and 2.
However, nothing worked until I opened new project and all of a sudden everything worked just fine.
Thank you again for your help…
Hey, I just read your post. Mine is default at 10 and I’ve never read of the autochannel on Elektron being 14, so is it possible you set to 14 sometime in the past? My understanding is that Autochannel is a user initiated change, so I don’t believe it will change by default to match another device. We can test that though.
Did you change the SRC page Channel from 1 to 9 using encoder A to scroll to the correct channel after pushing it once to initialize it? I believe that’s the channel you said you wanted. Let me know.
Could be that I set auto channel to 14 because keystep’s is 14 so maybe that is default in my head 
when I change it to 10 it has no any signal. On 14 is good.
On SRC page, if I scroll to channel 9, nothing is happening but on channel one and two everything works great (after I opened new project)…
One more thing that I noticed before opening new project was that I could hear some sequence coming from rev 2 with all tracks muted. But when unmute rev 2 nothing is happening. Weird
If both are on the same autochannel setting the defualt won’t matter anymore, only as long as they can communicate, that’s all that should matter so if keystep is 14 and digitakt is 14 it’s no problem - just keep it like that.
If opening a new project fixed the problem that’s also fine, but the discrepancy between what is happening and what is the outcome would bother me. There’s no reason for it to only work in the new project but if you want to use the same note sequence you already programmed in the old project, did you attempt to use the copy and paste functions to bring the sequence from the old project into the new project? what was the result? It feels like there may be some issues with the settings or with conflicting note/channel data on the devices being controlled.
So to understand - on the Rev2, you have digitakt set to sequence (notes programmed into the dt sequencer) and the mutes set to internal/external - so when the midi trig for the rev 2 is muted on digitakt, the Rev2 is still playing a note sequence? It sounds like you have some notes programmed into the rev2 native sequencer which are being triggered by the clock and transport control of digitakt - notes that are not in the digitakt sequencer. Can you access the rev2 sequencer and see if there are any notes to clear? If the device you are trying to sequence has it’s own note data and then only receives clock and transport (not notes from digitakt) it will play the notes. That’s the only thing I can think of. Can you check on that? otherwise it makes no logical sense.
Will check on next rehearsal, even though, I’m terrified to go back to that confusion 
I know, it make no sense for rev 2 to play sequence with muted channel but it did happened. At that point I was thinking about exorcism … and it was some weird sequence as well. Rev 2 has this weird gated sequencer which you can use for parameters and stuff (besides regular 64 step seq)… and maybe you are right, maybe something triggers that sequencer but than again why cannot be heard if track is not muted… Don’t know man. When I realized that everything works good with new project, I was so relived , didn’t even cross my mind to go back to that can of worms…
I think it has to do with note priority, I don’t understand the hierarchy of command but probably something to do with setting rev2 to receive notes makes it prioritize notes coming in from the external source, but it doesn’t cease the playback of internal sequencer data when the transport is active but no notes are being received. When muted, the note data stops being transmitted from digitakt, but the sequencer transport section is still active otherwise you couldn’t easily get them to resync. That’s why when you press play on dt the sequencer on rev2 starts, in order to lock in the sync.
Will check both and we will see.
Again, than you so much for your time.
no problem, hope we can get this all fixed up for you.