Hello All, AK CV Question

Elektron Gear Analog Keys/Four
1

Hello All, my AK arrives today so i am joining the Club. It will be heavily used for controlling
huge Modulars and my question is about the Cables. I ordered the Cables Accessories too.
When you connect to the AK and you split out the 2 CV, how do you know and what determines
which one is Gate and which one is Pitch? I don’t mean in the programming part but the Cable
only, its just 2 Cable connected to 1 hole…how do you know which one is which?

Thanks
Nedim

2

I connect one cable, set it to gate, place some trigs and then switch it between tip and ring in the config and see which one does something. Someone may have a better method!

Well, I used to do this, then I bought a couple of Elektron’s split cable kits which tell you which is tip, which is ring.

1 Like
3

When you say you ordered the cables accessories then do you mean the Elektron cable kit? Because if so, as I said above, on the splitter it indicates which side is which.

2 Likes
4

Hello and thank you…yes, i ordered the Elektron Kit…which i think will make my life easier.

Thanks

1 Like
5

can you use that splitter box like a dual passive mult in practice ? have you tried ?

I made my own cables and marked the ring see here, but I kinda still hanker after these nice little utility kit things - especially with 3.5mm trs flexibility too

welcome :thup:

6

Yeah, they are very handy, especially if you have gear that is both 1/4 inch and 3.5mm, like say you had both an old MS-20 and some newer modular gear.

Haven’t tried using it as a mult in that way. Will give it a go and feedback.

1 Like